he setup process begins loading a blue-looking text screen (not GUI). In that phase you will be asked to accept the EULA and choose a partition on which to install XP, and if that partition is new, you’ll be asked to format it by using either FAT, FAT32 or NTFS.

1. Start the computer from the CD.
setup_small
You can press F6 if you need to install additional SCSI adapters or other mass-storage devices. If you do you will be asked to supply a floppy disk with the drivers and you CANNOT browse it (or a CD for that matter). Make sure you have one handy.
setup1_small
If you want, you can press F2 to run the ASR sequence. For that you need a good backup created by the Windows XP backup program, and the ASR floppy disk. If you plan to install a new copy of XP – don’t do anything.
setup2_msmallSetup will load all the needed files and drivers.setup3_usmall
sebbtup4_smallSelect To Setup Windows XP Professional Now. If you want, and if you have a previous installation of XP, you can try to fix it by pressing R. If not, just press ENTER.
sebbtup4_small
1. Select or create the partition on which you will install Windows XP Professional. Depending upon your existing disk configuration choose one of the following:

* If the hard disk is unpartitioned, you can create and size the partition on which you will install Windows XP Professional.
zsetup6_smallxsetup7_smallcsetup8_small
* If the hard disk is already partitioned, but has enough unpartitioned disk space, you can create an additional partition in the unpartitioned space.
* If the hard disk already has a partition that is large enough, you can install Windows XP Professional on that partition. If the partition has an existing operating system, you will overwrite that operating system if you accept the default installation path. However, files other than the operating system files, such as program files and data files, will not be overwritten.
* If the hard disk has an existing partition, you can delete it to create more unpartitioned space for the new partition. Deleting an existing partition erases all data on that partition.

If you select a new partition during Setup, create and size only the partition on which you will install Windows XP Professional. After installation, use Disk Management to partition the remaining space on the hard disk.

1. Select a file system for the installation partition. After you create the partition on which you will install Windows XP Professional, you can use Setup to select the file system with which to format the partition. Windows XP Professional supports the NTFS file system in addition to the file allocation table (FAT) and FAT32 file systems. Windows Server 2003, Windows XP Professional, Windows 2000, and Windows NT are the only Microsoft operating systems that you can use to gain access to data on a local hard disk that is formatted with NTFS. If you plan to gain access to files that are on a local Windows XP Professional partition with the Microsoft Windows 95 or Windows 98 operating systems, you should format the partition with a FAT or FAT32 file system. We will use NTFS.
osetup9_smallhsetup10_small
1. Setup will then begin copying necessary files from the installation point (CD, local I386 or network share).
2. Note: If you began the installation process from an MS-DOS floppy, make sure you have and run SMARTDRV from the floppy, otherwise the copying process will probably last more than an hour, perhaps even more. With SMARTDRV (or if setup was run by booting from CD) the copying will probably last a few minutes, no more than 5 max.
1setup11_small2setup12_small
The computer will restart in graphical mode, and the installation will continue.ksetup13_small
The setup process reboots and loads a GUI mode phase.
5setup14_small
4setup15_small
It will then begin to load device drivers based upon what it finds on your computer. You don’t need to do anything at this stage.

00setup16_small
1. Click Customize to change regional settings, if necessary.

* Current System Locale – Affects how programs display dates, times, currency, and numbers. Choose the locale that matches your location, for example, French (Canada).
* Current Keyboard Layout – Accommodates the special characters and symbols used in different languages. Your keyboard layout determines which characters appear when you press keys on the keyboard.

If you don’t need to make any changes just press Next.
99setup17_small
After pressing Customize go to the Languages tab and select the “Install files for complex script and right-to-left languages”.
setup172_small
A warning message will appear. Press Ok.setup173_small
Warning: You must now press Apply!!!setup174_small
Setup will copy the necessary files from the installation point.
setup175_small
You can now go to the Regional Options tab and select Israel in the Location drop-down list, and Hebrew in the Standards and Formats drop-down list. Click Oksetup176_small
Type your name and organization.setup176_small
Type the product key.
setup19_small
Type the computer name and a password for the local Administrator account. The local Administrator account resides in the SAM of the computer, not in Active Directory. If you will be installing in a domain, you need either a pre-assigned computer name for which a domain account has been created, or the right to create a computer account within the domain.
setup20_small
Setup will now install the networking components.setup22_small
After a few seconds you will receive the Networking Settings window. BTW, if you have a NIC that is not in the HCL (see the What’s the HCL? page) and XP cannot detect it, or if you don’t have a NIC at all, setup will skip this step and you will immediately go to the final phase of the setup process.

Press Next to accept the Typical settings option if you have one of the following situations:

* You have a functional DHCP on your network.
* You have a computer running Internet Connection Sharing (ICS).
* You’re in a workgroup environment and do not plan to have any other servers or Active Directory at all, and all other workgroup members are configured in the same manner.

setup23_small
If you want to join a domain (NT 4.0 domain of W2K/2003 Active Directory domain) enter the domain’s name in the “Yes, make this computer a member of the following domain” box.lsetup251_small
To successfully join a domain you need the following:

* The person performing the installation must have a user account in Active Directory. This account does not need to be the domain Administrator account.

and

* The computer must have an existing computer account in the Active Directory database of the domain that the computer is joining, and the computer must be named exactly as its domain account is named.

or

* The person performing the installation must have appropriate permission to create a domain account for the computer during installation.

Also, you need to have connectivity to the domain’s domain controllers (only to the PDC if on an NT 4.0 domain) and a fully functional DNS server (only in AD domains). Read the Joining a Domain in Windows XP Pro and Requirements when Joining a Domain pages for more on this issue.

Enter the Active Directory domain name (in the form of xxx.yyy, for example: DPETRI.NET) or the NetBIOS name of the NT 4.0 domain (in the form of xxx, for example: DPETRI). Press Next.

Note: If you provide a wrong domain name or do not have the correct connectivity to the domain’s DNS server you will get an error message.

A username/password window will appear. Enter the name and password of the domain’s administrator (or your own if you’re the administrator on the target domain).
setup252_small
Note: Providing a wrong username or password will cause this phase to fail.

1. Next the setup process will finish copying files and configuring the setup. You do not need to do anything.
8setup26_small
7setup27_small
After the copying and configuring phase is finished, if XP finds that you have a badly configured screen resolution it will advise you to change it and ask you if you see the new settings right.asetup28_small
bsetup29_small
BTW, the minimum supported screen resolution in XP is 800X600.

1. Setup finishes and boots Windows XP.
setup30_small
setup31_smallsetup32_small
setup33_small

About these ads